1. EMC Scanner (DS,Rx series)

 RS321RS642RS644
Movement in XYZ-axis:300x200x100 mm600x400x200 mm600x400x200 mm
Size:620x400x550 mm920x600x750 mm920x600x950 mm
Weight:20 kg27 kg35 kg
Accuracy:+/- 0.3 mm
Min step size:1 mm
Line voltage:230V/110V, -15%, +10%
Line frequency:50Hz/60Hz, +/- 2Hz
Power consumption:<25W
Power con. standby:<20W
Environment temp.:+10 C to +35 C
Humidity:20% to 80%
Communication:RS-232 or Ethernet
Software:Requires Windows 10. Configurable for most spectrum analyzers. Configurable for National GPIB-adapters.

2. Heat Scanner Option (DS,Rx series)

Scanner:See product leaflet of EMC Scanner
Temperature range:0-150 °C
Resolution:+/- 0.3 °C
Point of measuring:6 mm diameter at a distance of 200 mm.
Response time:500 ms

3. EMC Scanner (HR series)

 HR-1HR-3
Movement in XYZ-axis:190x140x80 mm390x280x130 mm
Size:Width:535 Depth:600 Height:690 mmWidth:780 Depth:850 Height:810 mm
Weight:95 kg125 kg
Accuracy:+/- 0.05 mm
Min step size:0.025 mm
Line voltage:230V/110V, -15%, +10%
Line frequency:50Hz/60Hz, +/- 2Hz
Power consumption:1150W
Environment temp.:+10 C to +35 C
Humidity:20% to 80%
Communication:RS-232 or Ethernet (UTP)
Software:Requires Windows 10. Configurable for most spectrum analyzers. Configurable for National GPIB-adapters.

4. EMC Scanner (SCN-500 series)

 SCN-522SCN-524SCN-534SCN-564
Movement in XYZ-axis (mm):200×100200x100x100300x200x100600x400x300
Rotation around Z axis (Y/N):NYYY
Size:450x370x430 mm (17.7×14.6×16.9”)450x370x630 mm (17.7×14.6×24.8”)550x470x630 mm (21.7×18.5×24.8”)850x670x830 mm (33.5×26.4×32.7”)
Weight:11 kg (24 lbs)13 kg (29 lbs)15 kg (33 lbs)23 kg (51 lbs)
Min step size:0.1 mm
Line voltage:100 – 240 Vac
Line frequency:50Hz/60Hz
Power consumption:45W
Operating temp.:+10°C to +35°C
Storage temp.:-40°C to +71°C
Humidity:20% to 80% (+10°C to +35°C)
Maximum height over sea level:2000 m.
Over voltage category:OVC II
Laser Safety:CLASS 2 LASER PRODUCT IEC 60825-1: 2014 P 1mW; λ=670nm COMPLIES WITH 21 CFR 1040.10 AND 1040.11 EXCEPT FOR CONFORMANCE WITH IEC 60825-1 ED. 3., AS DESCRIBED IN LASER NOTICE NO. 56, DATED MAY 8, 2019.
Safety:EN 61010-1:2010/A1:2019/AC:2019-04: Safety requirements for electrical equipment for measurement, control, and laboratory use.
EMC:EN/(IEC) 61000-6-3:2007: Electromagnetic compatibility (EMC) — Part 6-3: Generic standards — Emission standard for residential, commercial and light-industrial environment. EN/(IEC) 61000-6-1:2007: Electromagnetic compatibility (EMC) — Part 6-1: Generic standards — Immunity for residential, commercial and light-industrial environment
Communication:USB 2.0
Software:Requires Windows 10. Configurable for most spectrum analyzers. Configurable for National GPIB-adapters.