1. Touch Panel and Keyboard Test

  • Press Settings icon on top right. Open User Options → Recall Defaults. Confirmation dialog will appear.
  • Press Yes.
  • Press BACK hard button. Main Settings screen will appear.
  • Press Advanced, then press Signal Source and select Test.
  • Press ABOUT in bottom right corner. About box will appear.
  • Press OK.
  • Press HOME hard button. Measurement screen will appear. Frequency around 1 MHz will be measured.
  • Press HOLD hard button. Measurement will be put in HOLD after current one finishes.
  • Press RESTART hard button. Instrument will perform single measurement.
  • Press Measurement Function name in top left corner. Function selection dialog will appear.
  • Select Period → Period Single → A, B.
  • Press OK. Measurement screen will appear.
  • Press AUTOSET hard button. Autoset progress dialog will appear followed by “Autoset finished” notification.