• Home
• Products
• Contact
• About

Set width of pulses generated on rear Pulse Output of the instrument.

Parameter syntax: PulseOutputWidth

Possible values: 4 ns .. 2.146999994 s (but at least 6 ns lower than PulseOutputPeriod)

Default value (RST condition): 500 us

Description

Set width of pulses generated on Pulse Output if Mode is set to Pulse Generator.  Resolution for this parameter is 2 ns. Should be at least 6 ns less than PulseOutputPeriod.

Example

SYST:CONF "PulseOutputWidth = 2.1 s"