With this VI you can set the amplitudes of a range of pulses stored in the generator to zero voltage. In order to specify the range you chose the start address and the number of pulses (Pulse count) [1…12287] in the range. The start address [1…12287] is given as a pulse number where 1 represents the first pulse. The range includes the pulse at the start address. In addition to the range you have to specify the channel byte, this is a number which represents the binary translation of the eight possible channels, a `true' will address that channel, e.g 32 (00100000) selects channel 6 only, 18 (00010010) selects channel 5 and 2 etc.