It is useful to select the “row selection sequences” (as shown) and place a trigger point before calling the BUILD ADDRESSING SCHEME… dialog. The default values will then be set properly.
This dialog will be immediately followed by (see THE *.CWS FILE):
and the created waveforms will be transmitted to the Waveform Generator. The above will work if there are exactly 2 waveforms defined.
If there are exactly 3 waveforms then the program assumes that the row waveforms in odd and even frames are different. The “B” waveform will define the odd frame and the hidden waveform will define the even frame. For example:
