1. Build addressing scheme…

Before issuing this command you have to prepare:

building blocks for construction of the waveform set;
a tabulated text ﬁle describing the pattern in subsequent frames;
only if desired – a tabulated text ﬁle describing the pattern in the ﬁrst frame and background (random pattern is default).

The command calls a dialog asking for details of the addressing scheme. It is the only necessary command in this menu.

2. Send all tables

Corresponds to normal SEND ALL command in OUT menu.

3. Set matrix mode

The mode is set automatically by the BUILD… command. Deselect to return to the normal operating mode (preferably resetting the generator as well).

4. Choose frame from data file…

You are prompted to select the spreadsheet ﬁle containing frame pattern data.

5. Reset generator

Same command as in OUT menu.