| Left click in | Modifier | Action |
| Superposition display | | select a pulse |
| Superposition display | Alt | select a sequence between markers (vertical lines) |
| Waveform A display | | select waveform A, drag pulse amplitude (even values of amplitude units) |
| Waveform B display | | select waveform B, drag pulse amplitude (even values of amplitude units) |
| Timing display | | drag pulse width or move boundary (according to preferences) |
| Left margin | | select waveform A or B, select superposition mode (A-B or B-A) |
| max-amplitude display | | type the value for the waveform amplitude |
| max-amplitude arrow icon | | increase or decrease the value |
| slot-width display | | type new width of the selected slot (and rescale the waveform timing accordingly if in “waveform scaling” mode) |
| slot-width arrow icon | | increase or decrease by 1 unit the width of the selected slot (and rescale the waveform timing accordingly, if in “scaling” mode) |
| icon above slot- width display | | change mode (“waveform scaling” or “one pulse only”) |
| waveform pop-up menu | | choose the waveform to appear in corresponding display area |
| amplitude units pop- up menu | | choose between arbitrary units (default) and volts, the superposition display will adjust accordingly and change color: dark red – units, green – volts |
| time units pop-up menu | | choose between arbitrary units (default), μs and ms |
| Waveform A or Waveform B display | Alt | drag pulse boundary or pulse width (opposite action to the setting chosen in the Timing menu) |
| Superposition display | Shift | extend pulse selection |
| Waveform A or Waveform B display | | drag pulse width or pulse boundary (according to the setting chosen in the Timing menu) |
