FTR-210R GNSS disciplined Frequency & Time Reference

• General information
• Preparation for Use
  • Preface
    • Introduction
    • Design Innovations
  • Safety
    • Introduction
    • Safety Precautions
    • Serviceable parts
    • Caution and Warning Statements
    • Symbols
    • Position, Orientation, Cooling and Connection of the Instrument
    • Disposal of Hazardous Materials
    • Potentially poisonous or injurious substances
    • If in Doubt about Safety
  • Unpacking
    • Check List
    • Identification
  • Installation
    • Safety precautions
    • Supply Voltage
    • Fold-Down Support
    • Rackmount Adapter - one unit
    • Assembling the Rackmount Kit (Option 22/90)
    • Reversing the Rackmount Kit
    • Rackmount Adapter - two units
    • Assembling the Rackmount Kit (Option 22/05)
    • Antenna Installation
• Getting Familiar with the Instrument
  • Front Panel
  • Stand-by button
  • Rear Panel Inputs and Outputs
  • Connection of accessories and other equipment to the instrument
  • Home Screen
  • Settings
    • Disciplining Settings
    • Rubidium & Disciplining Status
    • GNSS Settings & Status
    • Measurement Settings
  • Traceability (Option)
  • Measurement Data Display
• Measurements
  • Frequency/Period Average measurements
  • Frequency Offset measurements (Calibrator Use-case)
  • Time Interval Error (TIE)
  • Pulse characterization
    • Positive and Negative Pulse Width
    • Rise Time, Fall Time
    • Positive and Negative Slew Rate
  • Hold-off
  • Timeout
  • Calibration
    • Internal Calibration
    • Timebase Calibration
    • Voltage Calibration
  • Mathematics
    • Example use cases
  • Limits
  • Pulse Output (option)
  • ADEV Graph (option)
    • Time Interval measurements and Allan Deviation
    • Down-converted signals and Allan Deviation
  • Network
    • Web Interface
    • VNC
  • Front USB ports
  • File Manager
  • Firmware Update
  • Installing license
• Performance Check
  • General Information
  • Preparations
  • Power-On Test
  • Touch Panel Test
  • Frequency Offset Calculation Test (only for Option 220)
  • Front and Rear Panel Outputs
    • 10 MHz
    • 5 MHz
    • 1 PPS
    • Optional Ref. Frequency outputs (4x BNC)
    • Pulse Output (Option 132F)
    • Measuring Input Functions (Option 230)
• Preventive Maintenance
  • Calibration
    • Calibration intervals
    • Traceability option (Option 220)
  • Maintenance of internal components
  • Handling of the removable battery
  • Cleaning the instrument
• Specifications
• Sales and Service Contacts